ES620 IPPhone
www.escene.hk
Escene Communication
Network Setting
If you want to…
Then…
network setting --1) Choose “System settings” > “Advanced settings”;
--2) Enter the password required(The default is empty) ;
--3) Choose “Network”, you can configure the following parameters:
-Type: static IP or DHCP or PPPOE
-IP: enter IP address ,Note: Do not duplicate the ip address with
other devices on the network
-Mask: enter appropriate sub mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
Customizing Rings and Volume
If you want to…
This…
Change the ring
tone
--1) Choose “System settings” > “Phone settings” > “Ring type”;
--2) Press navigation to choose ring tone;
--3)Press softkey to choose a ring tone to play a sample of
it.
Commentaires sur ces manuels